PermitRouting

Oregon oversize permit rules

Travel hours, weekends, holidays, curfews, escorts and markings for oversize/overweight (OS/OW) loads in Oregon. Every rule is quoted from its source.

Permit office: Oregon Department of Transportation (ODOT), Commerce and Compliance Division, Over-Dimension Permit Unit · Checked against sources: 2026-10-16

This is a summary for trip planning, quoted from the state's official documents and from the conditions printed on permits the state issued. The permit you receive and the state permit office are the final authority: conditions change and a permit can add its own restrictions.

At a glance

What hours can oversize loads travel in Oregon?

loads over 12 ft wide: Overwidth loads more than 12'0" wide may not travel during Hours of Darkness on any route; daylight hours only (one-half hour before sunrise to one-half hour after sunset).

Can oversize loads travel at night in Oregon?

interstate or Route Map 2 green routes: Overwidth loads 8'7" to 10'0" wide may travel during Hours of Darkness (1/2 hr after sunset to 1/2 hr before sunrise) on all Interstates and on Green Routes shown on Route Map 2; not allowed on all other routes. interstates: Overwidth loads 10'1" to 12'0" wide may travel during Hours of Darkness on all Interstates only; not allowed on Green Routes or any other route. Manufactured homes and modular units are limited to 10 ft width on Interstates during hours of darkness.

Can oversize loads travel on weekends in Oregon?

loads over 8 ft 6 in wide: Summertime Weekend Daylight Hours (last Monday in May through first Monday in September, excluding Memorial Day/Independence Day/Labor Day holiday weekends): movement after noon Saturday and all day Sunday of overwidth loads 8'7"-14'0" wide is not allowed on non-Interstate routes west of the Cascades; allowed on all Interstates and on authorized routes east of the Cascades. loads over 14 ft wide: During Summertime Weekend Daylight Hours (Memorial Day to Labor Day period), loads more than 14'0" wide may not travel at all, on any route.

Which holidays are oversize loads not allowed to travel in Oregon?

Oregon restricts oversize/overweight movement on New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day. For New Year's Day, Memorial Day, Independence Day, Labor Day, and Christmas Day: travel is Not Allowed from noon the day before the holiday weekend begins until 12:01 a.m. the following day (a ~36-hour blackout), then Allowed on authorized routes only (any Interstate, US97, and black routes on Route Map 6/9 east of US97 in daylight; see Hours-of-Darkness chart at night) until the next blackout window, with the exact calendar depending on which weekday the holiday falls (e.g. holiday on Monday: blocked noon Fri-12:01am Sat, allowed Sat-Sun, blocked all Monday, allowed from 12:01am Tue). Thanksgiving uses an extended version: Not Allowed noon Wednesday to 12:01 a.m. Thursday; Allowed on authorized routes 12:01 a.m. Thursday to midnight Saturday; Not Allowed all day Sunday; Allowed on authorized routes from 12:01 a.m. Monday. Loads more than 14'0" wide are Not Allowed during any blackout OR 'authorized routes' phase of a holiday period (not just the strict blackout window). MLK Day, Presidents Day, Juneteenth, and Veterans Day are NOT travel-restricted in Oregon.

Are there rush-hour curfews for oversize loads in Oregon?

Yes. Curfews are listed for Portland, Salem, Eugene, Grants Pass, Medford. Portland urban area / I-5, I-84, I-205, US26 (Sunset Hwy) · 07:00–09:00 · Mon–Fri · loads over 12 ft wide: No movement 7-9 a.m. and 4-6 p.m. (business days) for loads 12'1"-14'0" wide on I-5 between WA state line & OR217, and I-5 Exit 24-33; loads over 14'0" wide (or mobile/modular over 14'0" base width / 15'0" overall width) additionally barred on I-5 (WA line to MP278), I-84 (MP15 to I-5), I-205, and US26/Sunset Hwy (MP64 to I-405), Monday-Friday.

When is an escort (pilot car) required for an oversize load in Oregon?

Width over 9 ft · two-lane roads: 1 front escort; Width over 11 ft · two-lane roads: 1 front + 1 rear escorts; Width over 12 ft · two-lane roads: 1 front + 1 rear escorts; Width over 14 ft · multilane highways: 1 rear escort. Height, length and other thresholds are listed on this page with the source for each rule.

Travel hours

  • loads over 12 ft wideOverwidth loads more than 12'0" wide may not travel during Hours of Darkness on any route; daylight hours only (one-half hour before sunrise to one-half hour after sunset).[1]
  • interstate or Route Map 2 green routesOverwidth loads 8'7" to 10'0" wide may travel during Hours of Darkness (1/2 hr after sunset to 1/2 hr before sunrise) on all Interstates and on Green Routes shown on Route Map 2; not allowed on all other routes.[1]
  • interstatesOverwidth loads 10'1" to 12'0" wide may travel during Hours of Darkness on all Interstates only; not allowed on Green Routes or any other route. Manufactured homes and modular units are limited to 10 ft width on Interstates during hours of darkness.[1]

Weekend travel

  • loads over 8 ft 6 in wideSummertime Weekend Daylight Hours (last Monday in May through first Monday in September, excluding Memorial Day/Independence Day/Labor Day holiday weekends): movement after noon Saturday and all day Sunday of overwidth loads 8'7"-14'0" wide is not allowed on non-Interstate routes west of the Cascades; allowed on all Interstates and on authorized routes east of the Cascades.[1]
  • loads over 14 ft wideDuring Summertime Weekend Daylight Hours (Memorial Day to Labor Day period), loads more than 14'0" wide may not travel at all, on any route.[1]

Holidays

Restricted holidays: New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day.

  • loads over 8 ft 6 in wideAttachment H holiday travel restriction tables for overwidth movement.[1]
  • When a holiday falls on a weekendFor New Year's Day, Memorial Day, Independence Day, Labor Day, and Christmas Day: travel is Not Allowed from noon the day before the holiday weekend begins until 12:01 a.m. the following day (a ~36-hour blackout), then Allowed on authorized routes only (any Interstate, US97, and black routes on Route Map 6/9 east of US97 in daylight; see Hours-of-Darkness chart at night) until the next blackout window, with the exact calendar depending on which weekday the holiday falls (e.g. holiday on Monday: blocked noon Fri-12:01am Sat, allowed Sat-Sun, blocked all Monday, allowed from 12:01am Tue). Thanksgiving uses an extended version: Not Allowed noon Wednesday to 12:01 a.m. Thursday; Allowed on authorized routes 12:01 a.m. Thursday to midnight Saturday; Not Allowed all day Sunday; Allowed on authorized routes from 12:01 a.m. Monday. Loads more than 14'0" wide are Not Allowed during any blackout OR 'authorized routes' phase of a holiday period (not just the strict blackout window). MLK Day, Presidents Day, Juneteenth, and Veterans Day are NOT travel-restricted in Oregon.

Rush-hour and city curfews

  • Portland urban area / I-5, I-84, I-205, US26 (Sunset Hwy) · 07:00–09:00 · Mon–Fri · loads over 12 ft wideNo movement 7-9 a.m. and 4-6 p.m. (business days) for loads 12'1"-14'0" wide on I-5 between WA state line & OR217, and I-5 Exit 24-33; loads over 14'0" wide (or mobile/modular over 14'0" base width / 15'0" overall width) additionally barred on I-5 (WA line to MP278), I-84 (MP15 to I-5), I-205, and US26/Sunset Hwy (MP64 to I-405), Monday-Friday.[1]
  • Portland urban area (all highways) · 11:00–13:00 · Mon–Fri · loads over 14 ft wideNo movement 11 a.m.-1 p.m. in the Portland urban area, on all highways, for loads more than 14'0" wide (for mobile/modular units, more than 14'0" base width or more than 15'0" overall width).[1]
  • Salem urban area · 07:00–09:00 · Mon–Fri · loads over 12 ft wideNo movement 7-9 a.m. and 4-6 p.m. (business days) in Salem urban area for loads 12'1"-14'0" wide (not allowed on non-Interstate routes); loads over 14'0" wide not allowed at all during this window.[1]
  • Salem urban area (all highways) · 11:00–13:00 · Mon–Fri · loads over 14 ft wideNo movement 11 a.m.-1 p.m. in the Salem urban area, on all highways, for loads more than 14'0" wide (for mobile/modular units, more than 14'0" base width or more than 15'0" overall width).[1]
  • Eugene urban area · 07:00–09:00 · Mon–Fri · loads over 12 ft wideNo movement 7-9 a.m. and 4-6 p.m. (business days) in Eugene urban area for loads 12'1"-14'0" wide (not allowed on non-Interstate routes); loads over 14'0" wide not allowed at all during this window.[1]
  • Eugene urban area (all highways) · 11:00–13:00 · Mon–Fri · loads over 14 ft wideNo movement 11 a.m.-1 p.m. in the Eugene urban area, on all highways, for loads more than 14'0" wide (for mobile/modular units, more than 14'0" base width or more than 15'0" overall width).[1]
  • Grants Pass urban area · 07:00–09:00 · Mon–Fri · loads over 12 ft wideNo movement 7-9 a.m. and 4-6 p.m. (business days) in Grants Pass urban area for loads 12'1"-14'0" wide (not allowed on non-Interstate routes); loads over 14'0" wide not allowed at all during this window.[1]
  • Grants Pass urban area (all highways) · 11:00–13:00 · Mon–Fri · loads over 14 ft wideNo movement 11 a.m.-1 p.m. in the Grants Pass urban area, on all highways, for loads more than 14'0" wide (for mobile/modular units, more than 14'0" base width or more than 15'0" overall width).[1]
  • Medford urban area · 07:00–09:00 · Mon–Fri · loads over 12 ft wideNo movement 7-9 a.m. and 4-6 p.m. (business days) in Medford urban area for loads 12'1"-14'0" wide (not allowed on non-Interstate routes); loads over 14'0" wide not allowed at all during this window.[1]
  • Medford urban area (all highways) · 11:00–13:00 · Mon–Fri · loads over 14 ft wideNo movement 11 a.m.-1 p.m. in the Medford urban area, on all highways, for loads more than 14'0" wide (for mobile/modular units, more than 14'0" base width or more than 15'0" overall width).[1]

When escorts (pilot cars) are required

  • Width over 9 ft · two-lane roads: 1 front escortWidth 9'1"-10' on Route Map 2 Purple Routes or Group Map 1 Black/Blue Routes requires one pilot vehicle; none required on Interstate/multilane or Route Map 2 Green Routes at this width.[2]
  • Width over 11 ft · two-lane roads: 1 front + 1 rear escortsWidth 11'1"-12' on Route Map 2 Purple Routes or Group Map 1 Black/Blue/Red Routes requires two pilot vehicles (one front, one rear).[2]
  • Width over 12 ft · two-lane roads: 1 front + 1 rear escortsWidth 12'1"-14' requires one pilot vehicle on Route Map 2 Green Routes, and two pilot vehicles on Route Map 2 Purple/Red Routes and all Group Map 1 routes. None required on Interstate/multilane highways at this width.[2]
  • Width over 14 ft · multilane highways: 1 rear escortWidth 14'1"-16' requires one pilot vehicle in the rear on Interstate and multilane highways, and two pilot vehicles on all 2-lane route categories (Route Map 2 Green/Purple/Red, Group Map 1 Black/Blue/Red).[2]
  • Width over 16 ftWidth over 16' requires pilot vehicle number/placement as specified by the permit (Superload territory).[2]
  • Length over 95 ft · two-lane roads: 1 front escortOverall length 95'1"-110' requires one pilot vehicle on all other 2-lane highways (none on Interstate/multilane or Route Map 2 Green Routes).[2]
  • Length over 110 ft · two-lane roads: 1 front escortOverall length 110'1"-120' requires one pilot vehicle on Route Map 2 Green Routes and all other 2-lane highways; none required on Interstate/multilane highways.[2]
  • Length over 120 ft · multilane highways: 1 rear escortOverall length 120'1"-150' requires one pilot vehicle in the rear on Interstate/multilane highways, and two pilot vehicles on Route Map 2 Green Routes and all other 2-lane highways.[2]
  • Length over 150 ftOverall length over 150' requires pilot vehicle number/placement as specified by the permit (Superload territory).[2]
  • Overhang over 15 ft · two-lane roads: 1 front escortFront overhang beyond the front bumper exceeding 15' requires one pilot vehicle in front on all 2-lane highways; none required on Interstate/multilane highways.[2]
  • Height over 14 ft 6 in: 1 front escort, height poleOverall height over 14'6" requires one pilot vehicle in front equipped with a non-conductive, non-destructive height pole measuring as high as the load, unless the permittee has filed a declaration with CCD assuming complete liability for the overheight movement.[2]

Escort vehicles and operators

  • Pilot vehicle(s) must be positioned 300-500 feet from the oversize unit (reduced near traffic congestion, signals, or other hazards); may not tow another vehicle; must maintain two-way radio communication with the oversize vehicle at all times; are under the direct supervision of the oversize vehicle operator.[2][3]
  • When one pilot vehicle is required for width, it travels in front except on multilane highways where it travels at the rear; when two are required, one travels front and one rear. A pilot vehicle required for height always travels in front. When the permit specifies a different number/placement than the standard table, the permit controls.[2]
  • Pilot vehicle equipment: roof-mounted warning sign at least 5 ft wide x 10 in high (black 8 in letters, FHWA series B, highway yellow background); two 18-inch-square red/fluorescent-orange warning flags on 3-ft staffs; eight safety flares or reflectors; amber warning lights (two flashing lights widely spaced, revolving light(s), or 360-degree strobe) mounted above the cab roof, visible 500 ft, 30 flashes/min minimum, displayed only during the oversize movement.[2]
  • Certified flagging may be required at specifically identified locations per the Manual on Uniform Traffic Control Devices; a rolling-stop option using three certified, trained pilot vehicles may substitute for certified flagging when authorized on the permit.[2]

Signs, flags and lights

  • OVERSIZE LOAD signsLoads exceeding 8'6" width or 80 ft length must display "OVERSIZE LOAD" signs front and rear, 7 ft wide x 18 in high, black 10-inch FHWA series C letters on highway-yellow (reflectorized background when operating between 1/2 hr after sunset and 1/2 hr before sunrise). "WIDE LOAD" may be used instead if over 8'6" wide and 80 ft or less long; "LONG LOAD" may be used if under 8'6" wide but over 80 ft long.[2][3]
  • FlagsOverwidth loads must be marked at the outermost extremities during daylight hours with red/fluorescent-orange flags not less than 18 inches square, visible front and rear (mounting device may not extend more than 3 in beyond the extremity). Loads extending 4 ft or more beyond the rear of the load-carrying part of the vehicle must likewise be flagged at the rear extremity during daylight.[2][3]
  • LightsDuring hours of darkness the outermost extremities (and any rear overhang of 4 ft or more) must be illuminated by lamps/markers per ORS Chapter 816. Overwidth power units (over 10 ft on a 2-lane highway or 12 ft on a multilane highway) must display amber warning lights above the cab roof, visible 500 ft, minimum 30 flashes/min; exempt when operating with a minimum of two pilot vehicles.[2][3]

Weather

  • Movement of a vehicle/combination exceeding 8'6" in width is prohibited when road surfaces are hazardous due to ice, snow, or frost; when visibility is less than 500 feet due to snow, mist, rain, dust, smoke, fog, or other atmospheric conditions; when wind conditions cause excessive swaying/weaving or tip-over risk or prevent the towed unit from maintaining its lane; or when ODOT has posted signs indicating hazardous travel.[2][3]
  • Chain-up locations are not staging areas for over-dimension vehicles; parking in chain-up areas is strictly prohibited. Drivers should check TripCheck (tripcheck.com) or call 511 / 800-977-6368 (in-state) or 503-588-2941 (out-of-state) before travel.[2][3]

Other permit conditions

  • Legal (no-permit) limits in Oregon: height 14'0", width 8'6", semitrailer length 53 ft, weight per ORS 818.010. A permit is required above these limits; routine permits go up to roughly 16 ft width / 17 ft height before Superload rules apply.[2][4]
  • SuperloadsSuperload thresholds: over 16 ft wide on Interstate/multilane highways, over 14 ft wide on any 2-lane state highway (non-divisible loads other than mobile/modular units), over 17 ft high on any highway, overall length greater than 150 ft, or (mobile/modular) box width over 14 ft and/or overall width over 15 ft. Superload drivers need 3+ years commercial combination experience (1+ year hauling oversize or towing wide mobile/modular units), a clean recent driving/accident record, and permits require up to 10 days processing with load diagrams, axle data, and route survey as needed.[5]
  • Minimum speed: vehicles operating under a Division 74 permit must maintain speed within 20 mph of the posted truck speed (four-way flashers required on grades where this can't be met); maximum speed may not exceed the posted speed or Oregon's basic speed rule (ORS Chapter 811). Exceeding the posted/basic speed limit is a permit violation.[6]
  • Convoy/spacing: movement of two or more vehicles required to display oversize/long-load/wide-load signs in convoy is strictly prohibited unless specifically authorized on the permit. A distance of one-half mile must be maintained between combinations traveling the same direction (except when overtaking/passing); slow-moving lanes and turnouts must be used to let traffic pass.[2][3]
  • A single trip permit (STP) proposes a suggested route that must be followed in the sequence shown; the permittee must contact the Over-Dimension Permit Unit before deviating. STPs are valid up to 10 days; continuous trip permits (CTPs) are valid up to one year.[2]
  • The permit does not authorize county roads or city streets unless specifically stated; a separate local permit is required (the Salem permit office can obtain approval for STPs in most counties). The permit does not authorize use of detour routes unless the permit specifically allows it at the permitted size/weight.[2]
  • Vehicles equipped with a transponder transporting an oversize/overweight load must enter an open scale regardless of a green light signal.[2][3]
  • When hauling equipment exceeds 8'6" width, the load must be non-divisible in width unless specifically authorized on the permit. Auxiliary axle(s) must be deployed and distribute the load weight whenever failure to do so would exceed tire/axle/tandem/group weight limits under OAR 734-074-0020.[2][3]
  • Rearview mirrors may exceed the authorized width only as much as needed to give the operator the required rear view, and must be retracted to legal width at all other times (issued permits specify up to 5 inches either side).[2][3]
  • Permittee and driver are responsible/liable for injury, property damage, and highway/structure damage from the move (OAR 734-082-0070); a structure strike must be reported to the Over-Dimension Permit Unit within 24 hours. Driver is responsible for judging whether local road conditions are hazardous (absent ODOT closure/posted signs) and must pull off at the next exit/safe location if hazardous, not proceeding until conditions abate.[2][4]
  • Weight table limits (unless otherwise specified on the permit): tires up to 600 lb per inch of width or manufacturer's rating, whichever is less; Weight Tables 1/2 (divisible or non-divisible) up to 20,000 lb single axle / 34,000 lb tandem; Weight Tables 3/4 (non-divisible) up to 21,500 lb single axle / 43,000 lb tandem; Weight Table 5 up to 24,000 lb single axle / 48,000 lb tandem (steering axle plus 4+ consecutive tandem axles); low-pressure flotation tires (15 in+ wide) up to 700 lb/in up to 36,000 lb single / 43,000 lb tandem.[2]
  • A Single Trip Permit and Road Use Assessment Fee (in lieu of weight-mile tax) is required when transporting a single non-divisible load with combined gross weight over 98,000 lb.[2]
  • This permit does not authorize loading or unloading in or on a state-maintained roadway or right-of-way without prior approval from the appropriate authorities.[3]

Sources

  1. Special Transportation Permit Attachment H - Hauling Hours and Days for Overwidth Movement (Form 2362) (Revised 01-2026)
  2. Special Transportation Permit Attachment 82A - General Provisions (Form 734-1994); verified against ODOT letterhead mirror, content corroborated by live Oregon Issued permits (Revised 01-2023, secondary summary)
  3. Conditions printed on Oregon permits issued in 2026 and processed by PermitRouting (1 permits)
  4. OAR Chapter 734, Division 82 (Variance Permits for Non-Divisible Loads)
  5. Oregon Department of Transportation: Oregon Superloads
  6. OAR 734-074-0035 (speed of vehicles operating under division 74 permits)

Let PermitRouting read the permit for you

Upload the state permit — PDF, scan or photo. PermitRouting recognizes the route, dimensions, travel hours, curfews and escort requirements, builds the route on the permitted roads and sends it to the driver.

Book a demo How permit recognition works